Pump Screeds

Pump screed systems can provide a high performance cementitious self smoothing compound which is based on the latest in cerment and polymer technology.

Once mix with water a highly fluid fast setting compound is produced which is suitable for use in industrial environments giving an extremely hard wearing floor surface. The pump screeds can accept full traffic over night including fork lift vehicles. Up to 2000 metre per day can be applied by a suitable pump reducing down time in Resin Floor Solutions projects.

Can be mixed easily and applied by hand for smaller projects. They are suitable for commercial and industrial applications. Can be left exposed as a wearing surface or over coated with a water based epoxy. Application thickness can be between 5mm – 25mm in one application. The pump screeds can also be used as a leveling screed under neath a wide range of resin coatings toppings as well as vinyl, carpet and other floor finishes.

Areas of application

Engineering workshops
Automotive manufacturing plants
Printing works
Warehouse refurbishment
Replacing fail greno screeds making good levels after moving failed tiling systems

This project at Tividales Limited involved transforming an old cracked, rough and damaged floor in to a new smooth, dust free floor. The floor was too rough to paint or to apply the 2-3mm self smoothing epoxy screed, so the client opted for a pumpable floor screed to smooth the floor followed by application of a coating to provide a glossy impermeable surface. The client was delighted with the results.

Resin Floor Solutions visited site to survey the floor, which was found to be badly damaged and unsuitable for coatings to be applied direct. The subfloor was the mechanically prepared to provide a surface suitable for bonding to.

Resin Floor Solutions recut any large cracks and filled with a tough epoxy repair compound. The whole floor was then primed with an epoxy primer and whilst wet a silica aggregate was broadcast into the primer to provide a textured surface.

Resin Floor Solutions mixed the pumpable screed outside to maintain a low dust area inside and transferred the product to the subfloor via the hoses. The material is applied by an expert floor layer at the correct speed to maintain the 5mm thickness required. An operative simply blends the flow lines together using a spiked roller.

Resin Floor Solutions left the screed to dry and then applied two coats of epoxy coating and the final finish can be seen above.

OUR SERVICES

Free advice & site survey
Demonstrations and test area’s carried out if required
We guarantee you an experienced & professional installation
We ensure minimum disruption and down time
Our flooring systems Improve working environments,
Our flooring systems increase efficiency and productivity
We help you reduce maintenance costs and elimination of long term problems.

TECHNICAL ADVICE

Our technical advisory service is always available to deal with specific enquiries with advice on correct methods and techniques for the repair of industrial floors.
Each project is unique and whatever the situation Resin Floor Solutions has a system to suit your requirements.

Please contact us for a no-obligation free site survey or quotation

Resin Floor Solutions were extremely professional, covering all our questions and offering helpful advice. The flooring work was started on time and completed on budget and within the time scale. We would have no hesitation in recommending Resin Floor Solutions to anyone in the future

Darren Edmonds Epoxy Screed for Factory, Stafford