Olympic Oils Ltd Project

Olympic Oils is one of the leading independent suppliers of vegetable oils, sauces and other food products in the UK and European markets, supplying Caterers, Wholesalers and Food Manufacturers.

There were a number of areas within the factory that needed attention mainly due to the ingress of water to the floors used in washing down at the end of production.

The work was carried out over a number of phases due to their production commitments. The client had an area of floor tiles in the mayonnaise production room that were cracked and broken up, water was getting under the tiles causing allsorts of issues.

The Sauce Production Room situated on the first floor had an existing Polyurethane screed that was becoming tired and broken up. The coving had come away from the wall and was no longer seamless, causing water to drip through to the floor below.

Resin Floor Solutions were also instructed to remove the old drain channels in the centre of the floor and backfill them. We then extended the channel at the end of the production area and were asked to lay the screed to a fall down to the new drain.

Resin Floor Solutions were asked to install an Anti-slip Polyurethane Screed at a minimum 5mm thickness and form coving up the walls to provide a seamless finished floor. This would alleviate any previous problems of water penetration from washing down after the days production.

The floors were prepared by first of all de-greasing with a suitable agent. Then using a vacuum assisted diamond grinder the floor had all contaminants removed. The areas were then primed with an epoxy primer and blinded with quartz aggregate to form a key for the screed. The Polyurethane Screed was trowel applied at 6mm and laid to falls towards the channels. Coving was then created leaving a seamless, anti-slip floor system.